Display Isis Brief - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Using the apply isis level-1 command in routing policy view will generate a default
route in L1 LSP. Using the apply isis level-2 command in routing policy view will
generate a default route in L2 LSP. Using the apply isis level-1-2 command in routing
policy view will generate a default route in L1 LSP and L2 LSP respectively.
Examples
# Generate a default route in L2 LSP.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] default-route-advertise

4.1.7 display isis brief

Syntax
display isis brief [ process-id ]
View
Any view
Parameters
process-id: IS-IS process ID, in the range of 1 to 65535.
Description
Use the display isis brief command to view brief IS-IS configuration information.
Examples
# Display brief IS-IS configuration information.
<Sysname> display isis brief
network-entity:
10.0000.0000.0001.00
is-level :level-1-2
cost-style:
preference :
Lsp-length receive :
Lsp-length originate :
Timers:
spf-slice-size:
ISIS (1) Protocol Brief Information :
narrow
15
1497
level-1 1497
level-2 1497
0
4-7
Chapter 4 IS-IS Configuration Commands