Entry-Limit (Mld-Snooping View); Fast-Leave (Mld-Snooping View) - H3C s3100 series Command Manual

entry-limit (MLD-Snooping view)

Syntax
entry-limit limit
undo entry-limit
View
MLD-Snooping view
Default Level
2: System level
Parameters
limit: Maximum number of entries in the MLD snooping forwarding table, in the range of 0 to 512.
Description
Use the entry-limit command to configure the maximum number of entries in the MLD snooping
forwarding table globally.
Use the undo fast-leave command to restore the default.
By default, the maximum number of entries in the MLD snooping forwarding table is 512.
Examples
# Configure the MLD snooping forwarding table to contain at most 512 entries.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] entry-limit 512

fast-leave (MLD-Snooping view)

Syntax
fast-leave [ vlan vlan-list ]
undo fast-leave [ vlan vlan-list ]
View
MLD-Snooping view
Default Level
2: System level
Parameters
vlan vlan-list: Defines one or multiple VLANs. You can provide up to 10 VLAN lists, by each of which
you can specify an individual VLAN in the form of vlan-id, or a VLAN range in the form of start-vlan-id to
end-vlan-id, where the end VLAN ID must be greater than the start VLAN ID. The effective range of a
VLAN ID is 1 to 4094.
2-5