A port can not be added to a port group if it has been added to an aggregation group, and vice versa.
Example
# Add the interface Ethernet 1/0/2~Ethernet1/0/5 to the port group1.
<Sysname>
system-view
[Sysname] port-group 1
[Sysname-port-group-1] port Ethernet 1/0/2 to Ethernet 1/0/5
port-group
Syntax
port-group
undo port-group
View
System view
Parameter
group-id: Number of port group, in the range of 1 to 100.
Description
Use the port-group command to create a port group or enter the specified port group view.
By default, no port group is configured.
Only S3100-EI Series Ethernet Switches support Port Group feature.
Example
# Create port group 1.
<Sysname>
system-view
System View: return to User View with Ctrl+Z.
[Sysname] port-group 1
[Sysname-port-group-1]
reset counters interface
Syntax
reset counters interface [ interface-type | interface-type interface-number ]
1-27