Reset Pim Neighbor; Reset Pim Routing-Table - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
[H3C] acl number 3010
[H3C-acl-adv-3010] rule permit ip source 10.10.0.0 0.0.255.255 destination
225.1.0.0 0.0.255.255
[H3C-acl-adv-3010] quit
[H3C] pim
[H3C-pim] register-policy 3010

6.1.18 reset pim neighbor

Syntax
reset pim neighbor { all | { neighbor-address | interface interface-type
interface-number } * }
View
User view
Parameter
all: Specifies all PIM neighbors.
neighbor-address: Neighbor address.
interface interface-type interface-number: Specifies a VLAN interface.
Description
Use the reset pim neighbor command to clear all PIM neighbors or PIM neighbors on
the specified VLAN interface.
Related command: display pim neighbor.
Example
# Clear the PIM neighbor 25.5.4.3.
<H3C> reset pim neighbor 25.5.4.3

6.1.19 reset pim routing-table

Syntax
reset pim routing-table { all | { group-address [ mask group-mask | mask-length
group-mask-length ] | source-address [ mask source-mask | mask-length
source-mask-length ] | { incoming-interface interface-type interface-number } } * }
View
User view
Chapter 6 PIM Configuration Commands
6-17