Ip Netstream Export V9-Template Refresh-Rate Packet - H3C SR6600 Command Reference Manual

Syntax
ip netstream export source interface interface-type interface-number
undo ip netstream export source
Default
The interface where the NetStream data is sent out (the interface connects to the NetStream server) is
used as the source interface.
Views
System view, NetStream aggregation view
Default command level
3: Manage level
Parameters
interface-type interface-number: Specifies a source interface by its type and number for NetStream data
export.
Usage guidelines
Different source interfaces can be configured in different aggregation views.
If no source interface is configured in aggregation view, the source interface configured in system view
is used.
H3C recommends that you connect the network management interface to the NetStream server and
configure it as the source interface.
Examples
# Configure the source interface for NetStream data export as GigabitEthernet 2/0/0.
<Sysname> system-view
[Sysname] ip netstream export source interface gigabitethernet 2/0/0
Related commands
ip netstream aggregation

ip netstream export v9-template refresh-rate packet

Use ip netstream export v9-template refresh-rate packet to configure the refresh frequency for
NetStream version 9 templates so that the templates are sent after the specified number of packets are
sent.
Use undo ip netstream export v9-template refresh-rate packet to restore the default.
Syntax
ip netstream export v9-template refresh-rate packet packets
undo ip netstream export v9-template refresh-rate packet
Default
Version 9 templates are sent every 20 packets.
Views
System view
175