Pim; Pim Bsr-Boundary - H3C s3600 series Command Manual

Expires: 00:01:40
Table 3-5 display pim rp-info command output description
PIM-SM RP-SET information:
BSR is:
Group/MaskLen
RP
Version
Priority
Uptime
Expires

pim

Syntax
pim
undo pim
View
System view
Parameters
None
Description
Use the pim command to enter PIM view so that you can configure PIM parameters globally. Note that
this command is not used to enable PIM.
Use the undo pim command to clear PIM configurations made in PIM view.
Examples
# Enter PIM view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] multicast routing-enable
[Sysname] pim
[Sysname-pim]

pim bsr-boundary

Syntax
pim bsr-boundary
undo pim bsr-boundary
Field
3-9
Description
RP-Set
IP address of the BSR
Multicast group range served by the RP
IP address of the RP
PIM version
RP priority
Length of time for which the RP has existed
Remaining lifetime of the RP