Table of Contents
Advertisement
UNIT DESCRIPTION
The LightSense™ Wireless PSWS Switch incorporates an electro-mechanical
relay that switches the load safely using patented zero-crossing technology.
LightSense Wireless
LightSense wireless devices use radio signals to communicate with each other
to control lighting and other types of electric loads in selected areas. LightSense
wireless devices use the 900MHz band for high-speed control communication.
Using the patented "frequency-agile" Top Dog™ technology, LightSense
wireless devices avoid interference with other 900MHz devices, such as
cordless phones and baby monitors.
Load Types
Use the PSWS for the following load types, up to the 800W maximum load:
•
Conventional (non-dimmable) fluorescent ballasts
•
Discharge lighting fixtures
•
Fixtures with integral dimmers
•
AC motors and pumps
CAUTION
To reduce the risk of
overheating and possible
damage to other equipment, do
not install to control a receptacle.
Call 800.223.4185 for Technical Support
CAUTION
Afin de réduire le risque de
surchauffe et la possibilité
d'endommager d'autres
matériels, ne pas installer
pour commander une prise.
Advertisement
Table of Contents
