The Ping Command - LEGRAND Mosaic Manageable switch Installation And Configuration Manual

Manageable Mosaic switch Installation and User Guide
license is acquired according to the feature string (one license is issued for a string representing
individual or multiple features).
1. Type setlic then press enter.
2. When prompted to enter the features string, type the upper case letter(s)
representing the feature string. For example, X (case sensitive) which is for the
802.1X protocol and then press enter.
3. When prompted, type the License key you received from Legrand then press
enter.
4. When prompted to Modify or Continue, type C to continue.
5. The system will inform you that new license information is being stored. The
manageable Mosaic switch device must be restarted to activate the special
feature. The management application (WizView or Web management) must
also be re-started in order to view and manage the special feature.

4.1.1.3 The PING Command

When connecting the manageable Mosaic switch to the network, or whenever network connectivity
needs to be tested, the integrated ping command can be used.
The network connectivity is tested by typing ping xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the IP
address of the server / device on the network with which connectivity is verified.
It is recommended to run this test at the end of the installation process when the unit is initially
connected to the network.
SUMMARY
Page 50 of 87