Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
1. On the LCS
Password. The following dialog tab is displayed.
Figure 4-7 Changing the LCS
2. In the Password field, enter your current password. (The default password is
"mypass").
3. In the New Password and Verify Password fields, enter your new password.
4.3
Default Settings of the manageable Mosaic switch
4.3.1 Restoring manageable Mosaic switch Default Settings
User may restore default parameters at any time through the following ways:
• From Telnet (see Section 8) by typing the Restore Factory command.
From the Web management. (Click the System icon and select the Factory Defaults. Press
the Restore bar).
• Using the LCS
Reset.
• Using the CLI connection, type the RSTFCT command (case sensitive).
The following parameters that may be configured through the CLI won't be affected
by the restore factory default commands:
CLI password, IP address, Netmask, Default gateway, SNMP get community,
•
SNMP set community
TFTP server address, TFTP filename, Features string, License key. (These
•
parameters may be configured by CLI and remote management)
2
- FTTO Init screen, click the File menu, and choose Change
2
- FTTO Init password
2
- FTTO Init application, click the Commands menu and choose
SUMMARY
Page 53 of 87
Advertisement
Table of Contents
