Table of Contents
Advertisement
Manageable Mosaic switch Installation and User Guide
Table 3-3 Factory Default Port Configuration Values
Parameter
F/O SFP Uplink port:
3.3.4 Changing Port Settings
Figure 3-3 Administration tab, Copper Port Configuration
To change the port settings
1. From Port View, expand the Administration tab.
2. Change the appropriate parameters with new values and click Apply.
The left side of the field consists of the parameter set by the user (Admin). The parameters on
the left side reflect the configuration identified by the operant (Oper)
Description
Port Status – On
Auto Negotiate – Enabled
Speed – Depends on A/N results
Duplex – Depends on A/N results
Flow Control – Enabled
SUMMARY
Page 19 of 87
Advertisement
Table of Contents
