Ipv6 Http Port - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

ipv6 http port

Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
ipv6 http port portNumber
no ipv6 http port
Command introduced in JunosE Release 10.1.0.
Specifies the port on which the HTTP local server receives connection attempts for IPv6.
The no version restores the default port number.
NOTE: Port numbers from 1 to 1024 are known as reserved ports. We recommend that
you specify a port number that does not belong to this range.
portNumber—Number of the port, in the range 0–65535; the default is port 80
Global Configuration
Configuring the HTTP Server to Support Guided Entrance in the JunosE Broadband Access
Configuration Guide
Chapter 10: I Commands
1023