Ipv6 Description - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 description

Syntax
Release Information
Description
Options
Mode
1016
ipv6 description name
no ipv6 description
Command introduced before JunosE Release 7.1.0.
Assigns a text description or an alias to an IPv6 interface or subinterface. Use the show
ipv6 interface command to display the text description. The no version removes the
description or alias.
name—Name for the IP interface; string of up to 256 characters
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.