Ipv6 Icmp-Error; Ipv6 Icmpv6 Multicast-Echo-Reply Enable - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
[Sysname] ipv6 host aaa 2001::1

1.1.21 ipv6 icmp-error

Syntax
ipv6 icmp-error { bucket bucket-size | ratelimit interval } *
undo ipv6 icmp-error
View
System view
Parameters
bucket bucket-size: Number of tokens in a token bucket, in the range of 1 to 200.
ratelimit interval: Update period of the token bucket in milliseconds, in the range of 0 to
2,147,483,647. The update period "0" indicates that the number of ICMPv6 error
packets sent is not restricted.
Description
Use the ipv6 icmp-error command to configure the size and update period of the token
bucket.
Use the undo ipv6 icmp-error command to restore the defaults.
By default, the size is 10 and the update period is 100 milliseconds. That is, at most 10
IPv6 ICMP error packets can be sent within these 100 milliseconds.
Examples
# Set the capacity of the token bucket to 50 and the update period to 100 milliseconds.
<Sysname> system-view
[Sysname] ipv6 icmp-error bucket 50 ratelimit 100

1.1.22 ipv6 icmpv6 multicast-echo-reply enable

Syntax
ipv6 icmpv6 multicast-echo-reply enable
undo ipv6 icmpv6 multicast-echo-reply
View
System view
Parameters
None
Chapter 1 IPv6 Basics Configuration Commands
1-27