Uni Multicast-Strip-Tag Enable; Uni Port-Isolate - H3C S7500E Series Command Reference Manual

maximum number of multicast channels supported on the UNI ports of an ET704 series ONU is 64,
the ONU will support 64 multicast channels.
Examples
# Allow the users connected to UNI 1 of the ONU to access up to 32 multicast channels at the same
time.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 multicast-group-number 32

uni multicast-strip-tag enable

Syntax
uni uni-number multicast-strip-tag enable
undo uni uni-number multicast-strip-tag enable
View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
Description
Use the uni multicast-strip-tag enable command to configure the specified UNI to remove the VLAN
tag of the downlink multicast flow.
Use the undo uni multicast-group-number enable command to remove the configuration.
By default, a UNI does not remove the VLAN tag of the downlink multicast flow.
Examples
# Remove the VLAN tag of the downlink multicast flow on UNI 1 of the ONU.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 multicast-strip-tag enable

uni port-isolate

Syntax
uni uni-number port-isolate
undo uni uni-number port-isolate
View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
3-34