Ipv6 Ntp Multicast Mode Configuration Example - H3C SR6600-X Configuration Manual

Reference clock ID: 3.0.1.31
Leap indicator: 00
Clock jitter: 0.165741 s
Stability: 0.000 pps
Clock precision: 2^-10
Root delay: 0.00534 ms
Root dispersion: 4.51282 ms
Reference time: d0c61289.10b1193f
# Verify that an IPv4 NTP association has been established between Router A and Router C.
[RouterA-GigabitEthernet2/0/1] display ntp-service sessions
********************************************************************************
[1234]3.0.1.31
Notes: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured.
Total sessions: 1

IPv6 NTP multicast mode configuration example

Network requirements
As shown in
segments and synchronizes the time among multiple devices.
• Configure Router C's local clock as a reference source, with the stratum level 2.
Configure Router C to operate in IPv6 multicast server mode and send IPv6 NTP multicast messages
•
from GigabitEthernet 2/0/1.
Configure Router D and Router A to operate in multicast client mode and receive IPv6 multicast
•
messages through their respective GigabitEthernet 2/0/1.
Figure 36 Network diagram
Configuration procedure
1. Assign an IP address to each interface, and make sure the routers can reach each other, as shown
in Figure
2. Configure Router C:
source reference
127.127.1.0
Figure 36, Router C functions as the NTP server for multiple devices on different network
36. (Details not shown.)
Wed, Dec 29 2010 20:03:21.065
stra reach poll
2 247
97
now offset delay disper
64 381 -0.0 0.0053 4.5128