Vxlan Local-Mac Report; Vxlan Tunnel Mac-Learning Disable - H3C MSR 810 Command Reference Manual

vxlan local-mac report

Use
vxlan local-mac report
Use
undo vxlan local-mac report
Syntax
vxlan local-mac report
undo vxlan local-mac report
Default
Local-MAC logging is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When the local-MAC logging feature is enabled, the VXLAN module immediately sends a log
message with its local MAC addresses to the information center. When a local MAC address is
added or removed, a log message is also sent to the information center to notify the local-MAC
change.
With the information center, you can set log message filtering and output rules, including output
destinations. For more information about configuring the information center, see Network
Management and Monitoring Configuration Guide.
Examples
# Enable local-MAC logging.
<Sysname> system-view
[Sysname] vxlan local-mac report

vxlan tunnel mac-learning disable

Use
vxlan tunnel mac-learning disable
Use
undo vxlan tunnel mac-learning disable
Syntax
vxlan tunnel mac-learning disable
undo vxlan tunnel mac-learning disable
Default
Remote-MAC address learning is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When network attacks occur, use this command to prevent the device from learning incorrect remote
MAC addresses in the data plane.
to enable local-MAC logging.
to disable local-MAC logging.
to disable remote-MAC address learning.
to enable remote-MAC address learning.
32