Display Link-Aggregation Summary - H3C MSR Series Command Reference Manual

Field
Aggregation Interface
Local
Port Priority
Oper-key
Flag
Remote
System ID
Received LACP Packets
Illegal
Sent LACP Packets

display link-aggregation summary

Use display link-aggregation summary to display the summary information for all aggregation
groups.
Syntax
display link-aggregation summary [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The information about the remote system for a static link aggregation group may be displayed as
none or may not be displayed, because the aggregation group is not aware of the partner's
information.
Examples
# Display the summary information for all aggregation groups.
<Sysname> display link-aggregation summary
Aggregation Interface Type:
BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation
Description
•
G—The sending system receives frames in default state.
•
H—The sending system receives frames in expired state.
Aggregate interface to which the member port belongs.
Information about the local end.
Aggregation priority of the port.
Operational key.
LACP protocol state flag.
Information about the remote end.
Remote end system ID, containing the system LACP priority and the system
MAC address.
Total number of LACP packets received.
Total number of illegal packets.
Total number of LACP packets sent.
100