Display Link-Aggregation Summary - H3C S7500E Series Command Manual

Command Manual – Link Aggregation
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
agg-id: ID of an existing service loop group.
Description
Use the display link-aggregation service-type command to display information
about the specified service loop groups.
If no aggregation group is specified, information about all service loop groups is
displayed.
Examples
# Display information about service loop group 1.
<Sysname> display link-aggregation service-type 1
Service-Loop
Group ID
---------------------------------------------------------
1
Table 1-2 Description on the fields of the display link-aggregation service-type
command
Service-Loop Group ID
Service Type
Quote Number

1.1.4 display link-aggregation summary

Syntax
display link-aggregation summary
View
Any view
Parameters
None
Service
Type
tunnel
Field
Service loop group ID
Service type supported by the group
Reference count for the service loop group. Only after it
decreases to zero can you remove the group.
Chapter 1 Link Aggregation Configuration Commands
Description
1-4
Quote
Number
0