Display Link-Aggregation Summary - H3C S3100 Series Command Manual

Port-Priority
Oper key
Flag
Remote
System ID
Port number
Received LACP Packets: 0 packet(s), Illegal: 0
packet(s)
Sent LACP Packets: 0 packet(s)

display link-aggregation summary

Syntax
display link-aggregation summary
View
Any view
Parameter
None
Description
Use the display link-aggregation summary command to display summary information of all
aggregation groups.
Note that as ports in a manual link aggregation groups do not acquire the information about their peers
automatically, so the entries in the information about the peer ports displayed are all 0 instead of the
actual values.
Example
# Display summary information of all aggregation groups.
<Sysname> display link-aggregation summary
Aggregation Group Type:D -- Dynamic, S -- Static , M -- Manual
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor ID: 0x8000, 000f-e20f-5104
AL AL Partner ID
ID Type
--------------------------------------------------------------------------
1 S 0x8000,0000-0000-0000 0
2 M none
Table 1-2 Description on the fields of the display link-aggregation summary command
Field
Aggregation Group Type
Field
Select Unselect Share Master
Ports
0
Aggregation group type: D for dynamic, S for static, and M for manual
Port priority
Operation key
Protocol status flag
Information about the remote end
Remote device ID
Port number
Statistics about received, invalid, and sent LACP
packets
Ports Type Port
1 NonS Ethernet1/0/2
1 NonS Ethernet1/0/3
Description
1-2
Description