Display Oap Client Summary - H3C CR16000-F Manual

PCB Version: 3.00
CPLD Version: 1.00
Bootrom Version: 1.12
Storage Card: 256 MB
Memory: 512 MB
Harddisk: 40.0 GB
Related commands

display oap client summary

display oap client summary
Use display oap client summary to display the summary registration information of OAP
clients.
Syntax
display oap client summary [ client-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
client-id : Specifies an OAP client by its ID in the range of 1 to 255. If you do not specify this
argument, the command displays the summary registration information of all OAP clients in
ascending order of client IDs. Client IDs are assigned by the OAP manager to OAP clients to
uniquely identify the clients.
Examples
# Display the summary registration information of OAP client 1.
<Sysname> display oap client summary 1
Client ID: 1
Status: Registered
MAC Address: 00e0-fc0a-c3ef
Interface: GigabitEthernet3/0/1
Last registered: 02/08/2011 12:00:00
# Display the summary registration information of all OAP clients.
<Sysname> display oap client summary
Client ID: 1
Status: Registered
MAC Address: 00e0-fc0a-c3ef
Interface: GigabitEthernet3/0/1
Last registered: 02/08/2011 12:00:00
Client ID: 2
Status: Registered
MAC Address: 00e0-fa1e-03da
Interface: GigabitEthernet3/0/2
2