Display Pppoe-Server Session Summary - H3C MSR810 Command Reference Manual

display pppoe-server session summary

Use display pppoe-server session summary to display summary PPPoE session information.
Syntax
Centralized devices in standalone mode:
display pppoe-server session summary [ interface interface-type interface-number ]
Distributed devices in standalone mode:
display
| interface interface-type interface-number }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do
not specify an interface for centralized devices in standalone mode, the command displays summary
PPPoE session information for all interfaces.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command
displays summary PPPoE session information for all cards. (Distributed devices in standalone
mode.)
Usage guidelines
Summary PPPoE session information on a phy sical interface can be di splayed only on the card
where the interface resides. Summary PPPoE session information on a logical interface can be
displayed on all cards.
Examples
# Display summary PPPoE session information on GigabitEthernet 1/0/1.
<Sysname> display pppoe-server session summary interface gigabitethernet 1/0/1
Total PPPoE sessions: 2
Ethernet interface: GE1/0/1
PPP interface: VA1
Remote MAC: 00e0-1500-7100
Service VLAN: N/A
Ethernet interface: GE1/0/1
PPP interface: VA2
Remote MAC:00e0-1600-7200
Service VLAN: 2
# (Centralized devices in standalone mode.) Display summary PPPoE session information on al l
interfaces.
<Sysname> display pppoe-server session summary
Total PPPoE sessions: 2
Local PPPoE sessions: 1
pppoe-server session summary
Session ID: 1
State: PADR_RCVD
Local MAC: 00e0-1400-7300
Customer VLAN: N/A
Session ID: 2
State: OPEN
Local MAC: 00e0-1400-7400
Customer VLAN: 155
68
{
slot slot-number