Display Rip Database - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Suppress time
Garbage-collect time
TRIP retransmit time
TRIP response packets retransmit count
Silent interfaces
Default routes
Verify-source
Networks
Configured peers
Triggered updates sent
Number of routes changes
Number of replies to queries

2.1.5 display rip database

Syntax
display rip process-id database
View
Any view
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
Description
Use the display rip database command to display the active routes in the RIP
database, which are sent in normal RIP routing updates.
Examples
# Display the active routes in the database of RIP process 100.
<Sysname> display rip 100 database
Field
2-5
Chapter 2 RIP Configuration Commands
Description
RIP suppress interval
RIP garbage collection interval
TRIP retransmit interval for sending
update requests and responses.
Maximum retransmit times for update
requests and responses
Number of silent interfaces, which do not
periodically send updates
Indicates whether a default route is sent
to RIP neighbors
Indicates whether the source IP address
is checked on the received RIP routing
updates
Networks enabled with RIP
Configured neighbors
Number of sent triggered updates
Number of changed routes in the
database
Number of RIP responses