Stp Timer Max-Age - H3C MSR 20-20 Command Reference Manual

Msr 20/30/50 series routers
Hide thumbs Also See for MSR 20-20:
Table of Contents

Advertisement

626
C
38: MSTP C
HAPTER
Related commands:
Examples

stp timer max-age

Syntax
View
Parameters
Description
C
ONFIGURATION
OMMANDS
interval of the hello time set on the device, while secondary root bridges use the
hello time set on the root bridge.
The setting of the hello time, forward delay and max age timers must meet the
following formulae.
2 × (forward delay - 1 second) ƒ max age
Max age ƒ 2 × (hello time + 1 second)
MSTP can work effectively on the entire network only when the above-mentioned
conditions are met; otherwise, network instability will frequently occur. We
recommend that you specify the network diameter of the switched network in the
stp bridge-diameter bridge-number command and let MSTP automatically
calculate an optimal setting of these three timers.
stp timer forward-delay, stp timer max-age, and stp bridge-diameter.
# Set the hello time of the device to 400 centiseconds.
<Sysname> system-view
[Sysname] stp timer hello 400
stp timer max-age centi-seconds
undo stp timer max-age
System view
centi-seconds: Max age, in the range 600 to 4,000 (in centiseconds). This
argument must be a multiple of 100.
Use the
stp timer max-age
Use the
undo stp timer max-age
device to the default setting.
By default, the max age is set to 2,000 centiseconds.
MSTP can detect link faults and automatically restore the forwarding state of the
redundant link. In the CIST, the device determines whether a configuration BPDU
received on a port has expired based on the max age timer. If a port receives a
configuration BPDU that has expired, that MST instance needs to re-computed.
The max age timer is not meaningful for MSTIs. If the current device is the root
bridge of the CIST, it determines whether a configuration BPDUs has expired based
on the configured max age timer; if the current device is not the root bridge of the
CIST, it uses the max age timer set on the CIST root bridge.
command to set the max age timer of the device.
command to restore the max age timer of the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr 20-21Msr 30-16Msr 30-20Msr 30-40Msr 30-60Msr 50 ... Show all

Table of Contents