Stp Tc-Protection Threshold; Stp Timer Forward-Delay - H3C MSR 20-20 Command Reference Manual

624 C 38: MSTP C
HAPTER

stp tc-protection threshold

Syntax
View
Parameters
Description
Examples

stp timer forward-delay

Syntax
View
Parameters
Description
C
ONFIGURATION OMMANDS
stp tc-protection threshold number
undo stp tc-protection threshold
System view
number: Maximum number of times the device deletes forwarding address entries
within a certain period of time immediately after it receives TC-BPDUs, in the
range of 1 to 255.
Use the
stp tc-protection threshold
number of times the device deletes forwarding address entries within 10 seconds
immediately after it receives TC-BPDUs.
Use the undo stp tc-protection threshold
configuration.
By default, the device limits the maximum number of times of deleting forwarding
address entries within a certain period of time immediately after it receives
TC-BPDUs to 6 times.
# Set the maximum number of times the device deletes forwarding address entries
within a certain period of time immediately after it receives TC-BPDUs to 10.
<Sysname> system-view
[Sysname] stp tc-protection threshold 10
stp timer forward-delay centi-seconds
undo stp timer forward-delay
System view
centi-seconds: Forward delay, in the range 400 to 3,000 (in centiseconds). This
argument must be a multiple of 100.
Use the
stp timer forward-delay
the device.
Use the
undo stp timer forward-delay
timer of the device to the default setting.
By default, the forward delay timer is set to 1,500 centiseconds.
In order to prevent temporary loops, a port must go through an intermediate
state, the learning state, before it transitions from the discarding state to the
command to configure the maximum
command to restore the default
command to set the forward delay timer of
command to restore the forward delay