Display Isdn Active-Channel; Display Isdn Call-Info - H3C MSR 20-20 Command Reference Manual

564 C 37: ISDN C
HAPTER

display isdn active-channel

Syntax
View
Parameter
Description
Example

display isdn call-info

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
display isdn active-channel [ interface interface-type interface-number ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
Use the
display isdn active-channel
information on ISDN interfaces. If no interface has been specified, the system will
display the active call information on all the ISDN interfaces.
The displayed information can help you with ISDN call troubleshooting.
# Display the active call information on the interface BRI 1/0.
<Sysname> display isdn active-channel interface bri 1/0
Bri 1/0
Channel Info: B1
Call Property: Digital
Calling Number: -
Called Number: 6688164
UserName: -
Start Time: 05-04-30 14:27:52
Time Used: 00:04:34
Table 94 Description on the fields of the display isdn active-channel command
Field
Channel Info
Call Property
Call Type
Calling Number
Calling Subaddress
Called Number
Called Subaddress
UserName
IP Address
Start Time
Time Used
display isdn call-info [ interface interface-type interface-number ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
command to view the active call
Call Type: Out
Calling Subaddress: -
Called Subaddress: -
IP Address: -
Description
Information about the channel
Call property: digital or analog
Call type: incoming or outgoing
Calling number
Calling subaddress
Called number
Called subaddress
User name used in PPP negotiation for authentication
IP address of the peer end
Time at which the link was set up
Duration of the call