Isdn Two-Tei - H3C MSR 20-20 Command Reference Manual

592 C 37: ISDN C
HAPTER
Description
Example

isdn two-tei

Syntax
C
ONFIGURATION OMMANDS
start: Starts counting.
stop: Stops counting.
Use the
isdn statistics
information received and transmitted at an ISDN interface.
By default, no statistics is made on the information transmitted and received at
interfaces.
Use the
isdn statistics start
making statistics on the messages received and transmitted at the interface.
Use the isdn statistics display
Use the
isdn statistics continue
statistics.
Use the isdn statistics display flow
of flow.
Use the
isdn statistics stop
Use the isdn statistics clear
# Start counting incoming and outgoing messages on CE1/PRI interface serial
1/0:15.
<Sysname> system-view
[Sysname] interface serial1/0:15
[Sysname-Serial1/0:15] isdn statistics start
# After a while, stop counting incoming and outgoing messages on CE1/PRI
interface serial 1/0:15.
[Sysname-Serial1/0:15] isdn statistics stop
# Display statistics about the received and sent messages forCE1/PRI interface
serial 1/0:15.
[Sysname-Serial1/0:15] isdn statistics display
Q.931 message received and sent out on current port:
CALL_PROC
SETUP
CONN
SETUP_ACK
CONNECT_ACK
DISCONNECT
RELEASE
RELEASE_COM
isdn two-tei
command to have the system make statistics on the
command in the view of an interface to start
command to view the statistic information.
command to continue the effort in making
command to view the statistics in the form
command to stop making statistics.
to clear the statistic information.
Send(0)
Send(6)
Send(13)
Send(0)
Send(5)
Send(3)
Send(1)
Send(18)
Recv(6)
Recv(13)
Recv(5)
Recv(6)
Recv(13)
Recv(16)
Recv(18)
Recv(1)