Reset Stp - H3C MSR 20-20 Command Reference Manual

606 C 38: MSTP C
HAPTER
Parameters
Description
Related commands:
Examples

reset stp

Syntax
View
Parameters
Description
Related commands:
Examples
C
ONFIGURATION OMMANDS
name: Name of the MST regions, a string of 1 to 32 characters.
Use the region-name
device.
Use the
undo region-name
default setting.
By default, the MST region name of a device is its MAC address.
The MST region name, the VLAN-to-instance mapping table and the MSTP revision
level of a device jointly determine the MST region the device belongs to.
instance, revision-level, check region-configuration, vlan-mapping
modulo, and active region-configuration.
# Set the MST region name of the device to "hello".
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] region-name hello
reset stp [ interface interface-list ]
User view
interface interface-list: Clears the spanning tree statistics information on one or
multiple ports. You can provide up to 10 port lists, by each of which you can
specify an individual port in the form of interface-type interface-number, or a port
range in the form of interface-type start-interface-number to interface-type
end-interface-number, where the end port number must be greater than the start
port number.
Use the
reset stp
The MSTP statistics information includes the numbers of TCN BPDUs,
configuration BPDUs, RST BPDUs and MST BPDUs sent/received through the
specified port(s) (STP BPDUs and TCN BPDUs are counted only for the CIST).
This command clears the spanning tree-related statistics information on the
specified port(s) if you specify the interface-list argument; otherwise, this
command clears the spanning tree-related statistics on all ports.
display stp.
# Clear the spanning tree-related statistics information on ports Ethernet 1/1
through Ethernet 1/3.
<Sysname> reset stp interface Ethernet 1/1 to Ethernet 1/3
command to configure the MST region name of your
command to restore the MST region name to the
command to clear the MSTP statistics information.