Mstp Configuration; Active Region-Configuration; Check Region-Configuration - H3C MSR 20-20 Command Reference Manual

38

active region-configuration

Syntax
View
Parameters
Description
Related commands:
Examples

check region-configuration

Syntax
View
Parameters
Description
MSTP C
ONFIGURATION
active region-configuration
MST region view
None
Use the
active region-configuration
configuration.
When you carry out this command, MSTP will replace the currently running MST
region-related parameters with the parameters you have just configured, and will
perform spanning tree computing again.
instance, region-name, revision-level, vlan-mapping modulo, and check
region-configuration.
# Activate MST region configuration manually.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] active region-configuration
check region-configuration
MST region view
None
Use the
check region-configuration
configuration information, including the region name, VLAN-to-instance mapping
and revision level settings.
Be sure that your MST region configurations are correct, especially the
VLAN-to-instance mapping table. MSTP-compliant devices are in the same MST
region only when they have the same region name, the same VLAN-to-instance
C
OMMANDS
command to activate your MST region
command to view all the MST region