Examples
stp mode
Syntax
View
Parameters
Description
Related commands:
Examples
stp no-agreement-check
Syntax
View
Parameters
Description
# Carry out mCheck on port Ethernet 1/1.
<Sysname> system-view
[Sysname] interface Ethernet 1/1
[Sysname-Ethernet1/1] stp mcheck
stp mode { stp | rstp | mstp }
undo stp mode
System view
stp: Configures the MSTP-compliant device to work in STP-compatible mode.
rstp: Configures MSTP-compliant device to work in RSTP mode.
mstp: Configures MSTP-compliant device to work in MSTP mode.
Use the
command to configure the MSTP work mode of the device.
stp mode
Use the
undo stp mode
default setting.
By default, an MSTP-compliant device works in MSTP mode.
stp mcheck, stp.
# Configure the MSTP-compliant device to work in STP-compatible mode.
<Sysname> system-view
[Sysname] stp mode stp
stp no-agreement-check
undo stp no-agreement-check
Ethernet interface view, port group view
None
Use the
stp no-agreement-check
port(s).
Use the
undo stp no-agreement-check
Check on port(s).
command to restore the MSTP work mode to the
command to enable No Agreement Check on
command to disable No Agreement
615