Parameter
Description
Example
isdn calling
Syntax
View
Parameter
Description
Example
isdn check-called-number
Syntax
View
caller-number: Caller number that an incoming ISDN call can carry, which is a
character string of 1 to 24 characters.
Use the
isdn caller-number
that the router can receive.
Use the
undo isdn caller-number
number.
# Configure the router to receive only the incoming calls from the caller numbers
with 400.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0]isdn caller-number 400
isdn calling calling-number
undo isdn calling
ISDN interface view
calling-number: Calling number.
Use the
command to have the messages from a calling party to a
isdn calling
called party carry the calling number. This command mainly applies on BRI
interfaces. If a calling party has configured this command on its BRI interface, the
call party will be able to see the calling number by viewing the call history
information.
Use the
undo isdn calling
that a calling party transmitted.
# Configure the message from a calling party to a called party on interface BRI 1/0
to carry calling number.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0] isdn calling 8060170
isdn check-called-number check-index called-party-number [ : subaddress ]
undo isdn check-called-number check-index
ISDN interface view.
command to configure the range of the numbers
command to delete the configured caller
command to delete calling number in the messages
571