Display Interface Bridge-Template - H3C MSR 20-20 Command Reference Manual

display interface bridge-template

Syntax
View
Parameter
Description
Example
0 eth2, 0 snap,
0 dlsw, 0 other,
0 vlan;
Send way:
0 broadcast, 0 fast, 0 other
Discard:
0 by import state,
0 for local frame ,
0 by mac table,
0 by import filter,
0 by outport filter,
0 by ip filter ,
0 other
Table 92 Description on the fields of the display bridge traffic command
Field
Input
Output
Send way
Discard
0 by import state
0 for local frame
0 by mac table
0 by import filter
0 by outport filter
0 by ip filter
0 other
display interface bridge-template [ interface-number ]
Any view
interface-number: Specifies an bridge-template interface.
Use the display interface bridge-template
information of a bridge-template interface.
# Display the statistics information of bridge-template 1.
Description
Indicates what kinds of and how many frames were received on
this interface. "10 total, 1 bpdu, 2 single," means that totally 10
frames were received on this interface, including one BPDU and
two unicast packets
Indicates what kinds of and how many frames were sent out on
this interface
Indicates how frames were sent
Indicates why and how many frames were discarded
The number of frames discarded due to abnormal inbound
interface state
The number of frames discarded because the source address and
destination address map to the same interface
The number of frames discarded due to denied entries configured
in the bridge table
The number of frames discarded due to the filtering rules
configured on the inbound interfaces
The number of frames discarded due to the filtering rules
configured on the outbound interfaces
The number of frames discarded due to the filtering rules
configured at the IP layer
The number of frames discarded due to other reasons
command to display the statistics
557