Stp Point-To-Point - H3C MSR 20-20 Command Reference Manual

Examples

stp point-to-point

Syntax
View
Table 110 Link speed vs. path cost
Link speed Duplex state
100Mbps Single Port
Aggregated
Link 2 Ports
Aggregated
Link 3 Ports
Aggregated
Link 4 Ports
1000Mbps Single Port
Aggregated
Link 2 Ports
Aggregated
Link 3 Ports
Aggregated
Link 4 Ports
10Gbps Single Port
Aggregated
Link 2 Ports
Aggregated
Link 3 Ports
Aggregated
Link 4 Ports
In the calculation of the path cost value of an aggregated link, 802.1D-1998 does
not take into account the number of ports in the aggregated link. Whereas,
802.1T takes the number of ports in the aggregated link into account. The
calculation formula is: Path Cost = 200,000,000/link speed (in 100 kbps), where
link speed is the sum of the link speed values of the non-blocked ports in the
aggregated link.
# Configure the device to calculate the default path cost for ports based on IEEE
802.1D-1998.
<Sysname> system-view
[Sysname] stp pathcost-standard dot1d-1998
# Configure the device to calculate the default path cost for ports based on IEEE
802.1t.
<Sysname> system-view
[Sysname] stp pathcost-standard dot1t
stp point-to-point { auto | force-false | force-true }
undo stp point-to-point
Ethernet interface view, port group view
802.1D-1998 IEEE 802.1t
19 200,000
19 100,000
19 66,666
19 50,000
4 20,000
4 10,000
4 6,666
4 5,000
2 2,000
2 1,000
2 666
2 500
617
Private standard
200
180
160
140
20
18
16
14
2
1
1
1