Isdn Configuration; Dialer Isdn-Leased (Isdn Bri Interface View) - H3C MSR 20-20 Command Reference Manual

37

dialer isdn-leased (ISDN BRI interface view)

Syntax
View
Parameter
Description
Example
ISDN C
dialer isdn-leased { 128k | number }
undo dialer isdn-leased { 128k | number }
ISDN BRI interface view
128k: 128 kbps ISDN leased line connection.
number: 64 kbps ISDN leased line connection. It can be 0 for the first B channel or
1 for the second B channel.
Use the
dialer isdn-leased 128k
connection.
Use the
undo dialer isdn-leased 128k
line connection.
Use the
dialer isdn-leased
connection.
Use the
undo dialer isdn-leased
line connection.
By default, no ISDN leased line connection is configured.
You must manually remove the existing leased line configuration before switching
from single B channel leased line to 128 kbps leased line.
n
You cannot configure this command on the BRI interfaces provided by 2S1B
■
modules.
For more information about configuring ISDN leased lines on CE1/PRI and
■
CT1/PRI interfaces, refer to "dialer isdn-leased (physical interface view)" on
page 320.
# Configure 128 kbps leased line connection.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0] dialer isdn-leased 128k
ONFIGURATION
command to configure 128 kbps leased line
number command to configure 64 kbps leased line
number command to remove 64 kbps leased
C
OMMANDS
command to remove 128 kbps leased