Display Isdn Call-Record - H3C MSR 20-20 Command Reference Manual

566 C 37: ISDN C
HAPTER

display isdn call-record

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Table 95 Description on the fields of the display isdn call-info command
Field
CCIndex
State
CES
Channel
Calling_Num[:Sub]:
Called_Num[:Sub]
display isdn call-record [ interface interface-type interface-number ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
Use the
display isdn call-record
history. If no interface is specified, the system displays all ISDN call history.
Executing this command will display information of the calls activated up to now,
but the number of retained entries is limited to 100.
# Display the information of ISDN call history.
<Sysname> display isdn call-record
Call Calling
Type Number
In 10660016 10660016
In 10660022 10660022
Description
Index of the call at the CC layer
Current state of the layer 3 link of the BRI interface. It can
be one of the following:
NULL
CALL_INITIATED
OVERLAP_SENDING
OUTGOING_CALL_PROCEEDING
CALL_DELIVERED
CALL_PRESENT
CALL_RECEIVED
CONNECT_REQUEST
INCOMING_CALL_PROCEEDING
ACTIVE
DISCONNECT_REQUEST
DISCONNECT_INDICATION
SUSPEND_REQUEST
RESUME_REQUEST
RELEASE_REQUEST
OVERLAP_RECEIVING
Connection endpoint suffix
ISDN B channel map for the call
Calling number: calling sub-address.
Called number: called sub-address
command to view the information of ISDN call
Called Start
Number Time
03-07-05 11:23:09
03-07-05 11:23:09
Stop Seconds
Time Used
- 0
- 0