shutdown
Syntax
View
Parameters
Description
Examples
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn protocol-mode network
[Sysname-Bri2/0] power-source
shutdown
undo shutdown
ISDN interface view
None
Use the
shutdown
command to shut down an ISDN interface.
Use the
undo shutdown
By default, an ISDN interface is up.
# Shut down BRI 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname- Bri2/0] shutdown
# Bring up BRI 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname- Bri2/0] undo shutdown
command to bring up an ISDN interface.
595