554
C
36: B
HAPTER
RIDGING
display bridge address-table
Syntax
View
Parameters
Description
Example
C
C
ONFIGURATION
OMMANDS
promiscuous operation mode, an Ethernet interface forwards all correct
frames, without filtering any MAC address.
Bridging is possible only between interfaces in the same bridge set.
■
As shown above, after being added into bridge set 1, Ethernet1/0 automatically
works in the promiscuous operation mode. When working in the promiscuous
operation mode, an Ethernet interface forwards all correct frames, without
filtering any MAC address.
display bridge address-table [ bridge-set bridge-set | dlsw | interface interface-type
interface-number | mac mac-address ] [ dynamic | static ]
Any view
bridge-set: Bridge set number, an integer in the range of 1 to 255.
dlsw: Displays the bridge table information about DLSw.
interface-type interface-number : Specifies an interface by its name and number.
mac-address: MAC address, in the format of H-H-H
dynamic: Displays the information about dynamically learned addresses in the
bridge table.
static: Displays the information about manually configured about addresses in the
bridge table.
Use the
display bridge address-table
information.
# View the information about all the manually configured entries in the bridge
table.
<Sysname> display bridge address-table static
The total of the address-items is 1
Mac-address
Set Flag Aging-time
0000-0001-0001
Flag meaning:
P--PERMIT
# View the information about a dynamically learned MAC address
1234-5678-1234 in the bridge table.
<Sysname> display bridge address-table mac 1234-5678-1234 dynamic
Mac-address
Set Flag Aging-time
1234-5678-1234
Flag meaning:
P--PERMIT
Table 90 Description on the fields of the display bridge address-table command
Field
Mac-address
command to view the bridge table
Receive
2
NS
00:02:04
N--DENY
D--DYNAMIC
Receive
1
PD
00:02:48
N--DENY
D--DYNAMIC
Description
MAC address
Send Interface-name
0
0
Ethernet1/0
S--STATIC
Send Interface-name
36
0
Ethernet1/0
S--STATIC