Mld Snooping Configuration Commands; Display Mld-Snooping Group - H3C S3100 Series Command Manual

2

MLD Snooping Configuration Commands

MLD Snooping Configuration Commands
Only the S3100-EI series support MLD Snooping configuration commands.

display mld-snooping group

Syntax
display mld-snooping group [ vlan vlan-id ] [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
vlan vlan-id: Displays the MLD snooping multicast group information in the specified VLAN, where
vlan-id is in the range of 1 to 4094. If you do not specify a VLAN, this command will display the MLD
snooping multicast group information in all VLANs.
verbose: Displays the detailed MLD snooping multicast group information.
Description
Use the display mld-snooping group command to view the MLD snooping multicast group
information.
Examples
# View the detailed MLD snooping multicast group information in VLAN 2.
<Sysname> display mld-snooping group vlan 2 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port.
2-1