Mac-Address (Bridge-Template Interface View); Map Bridge-Group - H3C MSR 20-20 Command Reference Manual

560 C 36: B
HAPTER RIDGING

mac-address (bridge-template interface view)

Syntax
View
Parameters
Description
Related command:
Example

map bridge-group

Syntax
View
Parameters
Description
C C
ONFIGURATION OMMANDS
mac-address mac-address
undo mac-address
Bridge-template interface view
mac-address: MAC address, in the format of H-H-H
Use the
mac-address
bridge-template interface.
Use the
undo mac-address
of the current bridge-template interface.
By default, if a bridge set contains Ethernet interfaces, its bridge-template
interface will use the MAC address of a random Ethernet interface. If the bridge
set contains no Ethernet interfaces, its bridge-template interface will use the
system default MAC address.
interface bridge-template.
n
Different models of devices may have different deferent system default MAC
addresses. Refer to your specific device model.
# Set the MAC address of the bridge-template interface of bridge set 1 to
0000-0011-0011.
<Sysname> system-view
[Sysname] interface bridge-template 1
[Sysname-Bridge-template1] mac-address 0000-0011-0011
map bridge-group broadcast
undo map bridge-group
PVC view
None
Use the map bridge-group broadcast
current PVC.
Use the
undo map bridge-group
PVC.
command to configure a MAC address for the current
command to configure the configured MAC address
command to enable bridging over the
command to disable bridging over the current