Chapter 2 Basic System Configuration And Debugging; Basic System Configuration - H3C S3100-52P Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
Chapter 2 Basic System Configuration and
When configuring basic system configuration and debugging, go to these sections for
information you are interested in:

Basic System Configuration

Displaying the System Status
Debugging the System
2.1 Basic System Configuration
Perform the following basic system configuration:
Set the current date and
time of the system
Set the local time zone
Debugging
To do...
clock datetime
HH:MM:SS
{ YYYY/MM/DD |
MM/DD/YYYY }
clock timezone
zone-name { add |
minus } HH:MM:SS
Chapter 2 Basic System Configuration
Use the command...
2-1
and Debugging
Remarks
Required
Execute this command in
user view.
The default value is
23:55:00 04/01/2000
when the system starts
up.
Optional
Execute this command in
user view.
By default, it is the UTC
time zone.