Ppp O E Client; Display Pppoe-Client Session - H3C MSR 20-20 Command Reference Manual

34

display pppoe-client session

Syntax
View
Parameter
Description
Example
PPP E C
O LIENT
C
OMMANDS
display pppoe-client session { packet | summary } [ dial-bundle-number number ]
Any view
packet: Displays the statistics of PPPoE session data packet.
summary: Displays the summary of PPPoE session.
dial-bundle-number number: Displays the statistics of the specified PPPoE
session, in the range 1 to 255. If PPPoE session is not specified, the system will
display the statistics of all PPPoE sessions.
Use the
display pppoe-client session
statistics of PPPoE session.
# Display the summary of PPPoE session.
<Sysname> display pppoe-client session summary
There are 2 sessions in total:
ID Bundle Dialer
1 1 1
2 2 2
Table 86 Description on the fields of display pppoe-client session summary
Field
ID
Server-MAC
Client-MAC
Dialer
Bundle
Intf
State
# Display the statistics of PPPoE session packet
<Sysname> display pppoe-client session packet
PPPoE Client Session:
ID InP InO
=================================================================
C
ONFIGURATION
command to display the state and
Intf Client-MAC
Eth1/0 00e0fc0254f3
Eth1/0 00e0fc0254f3
Description
Session ID, PPPoE session ID
MAC address of PPPoE server
MAC address of PPPoE client
Corresponding dialer interface of PPPoE session
Dialer bundle containing PPPoE session
Ethernet interface containing PPPoE session
State of PPPoE session
InD
Server-MAC State
00049a23b050 PPPUP
00049a23b050 PPPUP
OutP OutO OutD