Pppoe-Client Dial-Bundle-Number - H3C MSR 20-20 Command Reference Manual

540 C 34: PPP
HAPTER O

pppoe-client dial-bundle-number

Syntax
View
Parameter
Description
E C C C
LIENT ONFIGURATION OMMANDS
1 164
2 304
Table 87 Description on the fields of display pppoe-server session packet
Field
ID
InP
InO
InD
OutP
OutO
OutD
pppoe-client dial-bundle-number number [ no-hostuniq ] [ idle-timeout seconds
[ queue-length packets ] ]
undo pppoe-client dial-bundle-number number
Ethernet interface view, virtual Ethernet interface view
dial-bundle-number number: Dialer bundle number corresponding to PPPoE
session, in the range 1 to 255 The number argument can be used to uniquely
specify a PPPoE session, or as a PPPoE session.
no-hostuniq: The call originated from PPPoE client does not carry the Host-Uniq
field. By default, no-hostuniq is not configured.
idle-timeout seconds: Idle time of PPPoE session in seconds, its value ranges from
1 to 65535. If the parameter is not configured, PPPoE session will work in
permanent online mode. Otherwise, it works in packet trigger mode.
queue-length packets: packet number cached in the system before PPPoE session
is established, its value ranges from 1 to 100. Only after idle-timeout is
configured will the parameter be enabled. By default, packets is 10.
Use the
pppoe-client
dialer bundle corresponding to the session.
Use the undo pppoe-client
By default, no PPPoE session is configured.
An Ethernet interface can be configured with multiple PPPoE sessions, which
means an Ethernet interface can belong to multiple dialer bundles. However, a
dialer bundle can own only one Ethernet interface. Each PPPoE session correspond
to one dialer bundle. If a dialer bundle at a certain dialer interface has had one
Ethernet interface been used by PPPoE, other interfaces cannot be added to this
dialer bundle. Likewise, if a dialer bundle has had interfaces other than the PPPoE
6126 0
9886 0
Description
PPPoE session ID
In Packets: number of received packets
In Octets: number of received octets
In Discards: number of illegal packets received and discarded
Out Packets: number of packets sent
Out Octets: number of octets sent
Out Discards: number of illegal packets sent and discarded
command to establish a PPPoE session and specify the
command to delete a PPPoE session.
83 1069
156 2142
0
0