Example
pppoe-server max-sessions local-mac
Syntax
View
Parameter
Description
Example
pppoe-server max-sessions remote-mac
Syntax
View
Parameter
Use the
undo pppoe-server log-information off
function.
By default, the PPPoE server displays the PPP log information.
Displaying too much log information can affect the performance of the device and
can be a nuisance to user during configuration. You can use this command to
disable the PPPoE server to display the PPP log information.
# Disable the PPPoE server to display PPP log information.
<Sysname> system-view
[Sysname] pppoe-server log-information off
pppoe-server max-sessions local-mac number
undo pppoe-server max-sessions local-mac
System view
number: Maximum number of sessions that can be established at a local MAC
address, in the range 1 to 4069.
Use the
pppoe-server max-sessions local-mac
number of PPPoE sessions that can be established at a local MAC address.
Use the
undo pppoe-server max-sessions local-mac
default configuration.
By default, the value of number is 100.
# Set the maximum number of PPPoE sessions that can be established at a local
MAC address to 50.
<Sysname> system-view
[Sysname] pppoe-server max-sessions local-mac 50
pppoe-server max-sessions remote-mac number
undo pppoe-server max-sessions remote-mac
System view
number: Maximum number of PPPoE sessions that can be established by the
system with regard to a peer MAC address, in the range 1 to 4096.
command to enable the
command to set the maximum
command to restore the
535