Using Another Username To Log In To An Ftp Server; Maintaining And Debugging An Ftp Connection; Terminating An Ftp Connection - H3C SR6600 Fundamentals Configuration Manual

Using Another Username to Log In to an FTP Server

After the device serving as the FTP client has established a connection with the FTP server (For how to
establish an FTP connection, see
log in to the FTP server.
This feature allows you to switch to different user levels without affecting the current FTP connection
(namely, the FTP control connection, data connection and connection status are not changed); if you
input an incorrect username or password, the current connection will be terminated, and you must log in
again to access the FTP server.
Follow the step below to use another username to log in to the FTP server:
Use another username to re-log in after
successfully logging in to the FTP server

Maintaining and Debugging an FTP Connection

After a device serving as the FTP client has established a connection with the FTP server (For how to
establish an FTP connection, see
operations to locate and diagnose problems encountered in an FTP connection:
Display the help information of
FTP-related commands supported by
the remote FTP server
Enable information display in a detailed
manner
Enable FTP related debugging when the
device acts as the FTP client

Terminating an FTP Connection

After the device serving as the FTP client has established a connection with the FTP server (For how to
establish an FTP connection, see
commands to terminate an FTP connection:
Terminate the connection to the FTP
server without exiting FTP client view
Terminate the connection to the FTP
server without exiting FTP client view
Terminate the connection to the FTP
server and return to user view
Establishing an FTP
To do...
Establishing an FTP
To do...
Establishing an FTP
To do...
Connection.), you can use another username to
Use the command...
user username [ password ]
Connection.), you can perform the following
Use the command...
remotehelp [ protocol-command ]
verbose
debugging
Connection.), you can use any of the following
Use the command...
disconnect
close
bye
6-91
Remarks
Optional
Remarks
Optional
Optional
Enabled by default
Optional
Disabled by default
Remarks
Optional
Equal to the close command.
Optional
Equal to the disconnect
command.
Optional
Equal to the quit command in
FTP client view.