Configuring L2Vpn-Leased Users; Configuring Isp Domains For Leased Users - H3C SR8800-F Configuration Manual

Step
3. Configure
subnet-leased users.

Configuring L2VPN-leased users

You can configure one L2VPN-leased user on an interface on an L2VPN network. An L2VPN-leased
user carries IPv4 and IPv6 traffic from hosts.
On a Layer 3 Ethernet subinterface, the IPoE L2VPN-leased user is mutually exclusive with the
subinterface rate statistics collection feature. For more information about subinterface rate statistics
collection, see Interface Configuration Guide.
To configure an L2VPN-leased user:
Step
1. Enter system view.
2. Enter interface view.
3. Configure an
L2VPN-leased user.

Configuring ISP domains for leased users

The BRAS selects ISP domains for leased users in the following order:
•
Domains configured for each interface-leased user and each subnet-leased user
•
Service-specific domain
•
Domain configured for leased users
•
Default system domain
For more information about domains configured for each interface-leased user and each
subnet-leased user, see
users," respectively. For more information about how to configure service-specific ISP domains, see
"Configuring service-specific ISP
system domain, see
To configure ISP domains for leased users:
Step
1. Enter system view.
Command
•
Configure an IPv4 subnet-leased
user:
ip subscriber subnet-leased ip
ip-address { mask | mask-length }
username name password
{ ciphertext | plaintext } string
[ domain domain-name ]
•
Configure an IPv6 subnet-leased
user:
ipv6 subscriber subnet-leased
ipv6 ipv6-address prefix-length
username name password
{ ciphertext | plaintext } string
[ domain domain-name ]
Command
system-view
interface interface-type
interface-number
ip subscriber l2vpn-leased username
name password { ciphertext |
plaintext } string [ domain
domain-name ]
"Configuring interface-leased
domains." For more information about how to configure the default
"Configuring AAA."
Command
system-view
users" and
406
Remarks
By default, no subnet-leased user
is configured.
Remarks
N/A
N/A
By default, no L2VPN-leased
user is configured.
"Configuring subnet-leased
Remarks
N/A