534
C
33: PPP
HAPTER
O
pppoe-server bind
Syntax
View
Parameter
Description
Example
pppoe-server log-information off
Syntax
View
Parameter
Description
E S
C
C
ERVER
ONFIGURATION
OMMANDS
Table 85 Description on the fields of the display pppoe-server session packet command
Field
InP
InO
InD
OutP
OutO
OutD
pppoe-server bind virtual-template number
undo pppoe-server bind
Interface view
number: Number of the virtual-template interface, in the range 0 to 1023.
Use the
pppoe-server bind
specified by the Ethernet interface.
Use the
undo pppoe-server bind
relevant interface.
By default, PPPoE protocol is disabled.
# Enable PPPoE on interface Ethernet 1/0, and bind Virtual-Template1 with
interface Ethernet 1/0
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pppoe-server bind virtual-template 1
pppoe-server log-information off
undo pppoe-server log-information off
System view
None
Use the
pppoe-server log-information off
server to display the PPP log information.
Description
In Packets, Packages received
In Octets, Bytes received
In Discards, Received and then discarded packages
Out Packets, Packages sent
Out Octets, Bytes sent
Out Discard, Discarded packages that might be sent
command to enable PPPoE on the virtual-template
command to disable PPPoE protocol on the
command to disable the PPPoE