ABB IRB 6700 Series Product Manual page 577

6
7
Refitting the axis-6 motor
Use this procedure to refit the motor.
Preparations prior to refitting motor
1
Product manual - IRB 6700
3HAC044266-001 Revision: N
Action
Remove the motor by lifting it straight up
from the gear while at the same time pick-
ing out the motor cables from the motor.
Make sure the motor pinion is not dam-
aged!
Disconnect the 24 VDC power supply.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
© Copyright 2013 - 2018 ABB. All rights reserved.
4.7.6 Replacing the axis-6 motor
Note
xx1200001091
xx1200001096
Note
Continues on next page
4 Repair
Continued
577