ABB IRB 6700 Series Product Manual page 493

Press tool and hydraulic cylinder
The figure below shows the hydraulic cylinder mounted on the press tool.
The press tool includes two press devices that are used to different models of the
balancing device.
xx0200000174
A
B
C
D
E
F
G
Required equipment
Equipment, etc.
Hydraulic press tool, balan-
cing device
Hydraulic cylinder
Hydraulic pump 80 MPa
Product manual - IRB 6700
3HAC044266-001 Revision: N
Press block
Hydraulic cylinder
Press device
Bolt, press device
Moving pin with marking
Bolt (4 pcs)
Pin, attached to the fix plate
Article number
3HAC020902-001
3HAC11731-1
3HAC13086-1
© Copyright 2013 - 2018 ABB. All rights reserved.
4.6.4 Unloading the balancing device
Note
Used to unload or restore a balancing
device.
To be used with the press tool.
To be used with the hydraulic cylinder.
Continues on next page
4 Repair
Continued
493