ABB IRB 6700 Series Product Manual page 483

6
7
Removing the shaft end, cradle
The procedure of removing the shaft end in the cradle is the same on both sides.
Product manual - IRB 6700
3HAC044266-001 Revision: N
4.6.3 Replacing the rear bearings on the balancing device
Action
Fit a lifting shackle to the balancing device.
Fit the lifting accessory to the shackle and
raise to unload the weight.
Note
Remove one shaft end at a time!
© Copyright 2013 - 2018 ABB. All rights reserved.
Note
Lifting shackle: SA-10-8-NA1
xx1300000661
Lifting accessory (chain): 3HAC15556-1
Continues on next page
4 Repair
Continued
483