ABB IRB 6700 Series Product Manual page 373

3
4
Replacing the synchronization mark plate
The images below shows a wrist with standard turning disc, but is also valid for
the process turning disc.
The design of the turning disc spare part might require replacement of the axis-6
synchronization mark plate if the existing plate is not compatible with the new
turning disc.
Product manual - IRB 6700
3HAC044266-001 Revision: N
Action
IRB 6700 -300/2.70, -245/3.00.
Remove the 21 M10 screws and washers,
that secure the process turning disc.
Remove the process turning disc.
© Copyright 2013 - 2018 ABB. All rights reserved.
4.5.4 Replacing the process turning disc
Note
Continues on next page
4 Repair
Continued
373