ABB IRB 6700 Series Product Manual page 105

5
6
Connecting the fan cabling
1
2
Product manual - IRB 6700
3HAC044266-001 Revision: N
Action
Fit the fan unit sheets around the motor and fasten
them to each other by tightening the six screws.
Lift the box so that it does not rest directly on the
robot and secure the box against the motor with
the two tightening screws.
Tighten them properly so that the box is firmly
attached to the motor.
Action
Remove the rear cover plate.
Fit the customer connection plate.
© Copyright 2013 - 2018 ABB. All rights reserved.
2 Installation and commissioning
2.7.2 Installing the motor cooling fan (option)
Note
xx1800000158
xx1800000160
Note
xx1800000161
xx1800000162
Continues on next page
Continued
105